Lysaght Trimdek Metal Roofing — High-Tensile Structural Decking | Atap Metal Deck Trimdek

Lysaght Trimdek Metal Roofing — High-Tensile Structural Decking | Atap Metal Deck Trimdek

Product Description

• A high-tensile steel roofing and walling profile (Besi Atap) offering exceptional spanning capability and a bold, trapezoidal appearance. Ideal for projects requiring maximum structural integrity and high-speed installation.
• Technical Authority Commentary:
  Contractors and Project Managers in Malaysia often face the challenge of water ingress and structural deflection during peak monsoon seasons. Lysaght Trimdek addresses these engineering pain points through its high-strength steel chemistry and anti-capillary side laps. Designed for heavy industrial and commercial projects, this profile ensures that large-scale roofing systems maintain structural rigidity under high wind loads while preventing backflow.
• At Kee Maju Jaya, we prioritize stock consistency and logistics efficiency, ensuring site delivery to key hubs including KL, Selangor, Penang, Johor, and the East Coast.

Key Technical Features

• High-Tensile Strength (Besi Tahan Lasak): Provides superior load-bearing capacity, allowing for wider purlin spacing and reduced structural steel costs.
• Anti-Capillary Groove: Specifically engineered to prevent water siphoning at the laps, ensuring 100% leak-proof performance during heavy tropical downpours.
• Long-Span Capability: Minimizes the need for end laps on large industrial warehouses, reducing potential failure points.
• Versatile Fixing: Can be used for both roofing and wall cladding (Dinding Metal Deck) for a unified architectural finish.

Applications & Benefits

• Industrial (Factories/Warehouses): Provides heavy-duty protection and long-term durability. Benefit: Reduced maintenance cycles and higher ROI for facility managers.
• Coastal Areas (East Coast): Enhanced coating technology offers superior corrosion resistance (Tahan Karat). Benefit: Extended lifespan in high-salinity environments like Terengganu and Kuantan.
• Infrastructure (JKR/TNB Projects): Fully compliant with local industry expectations for government and utility buildings. Benefit: Streamlined approval processes and regulatory compliance.

Technical Specifications Table

FAQ Section

QUESTION 1: What is the minimum roof pitch for Lysaght Trimdek in Malaysia?
ANSWER 1: Lysaght Trimdek is engineered to perform at a minimum roof pitch of 2 degrees (1 in 27). For projects in high-rainfall areas like Selangor or Sarawak, Kee Maju Jaya recommends ensuring proper purlin alignment to maintain this gradient for optimal monsoon drainage and to prevent water ponding.

QUESTION 2: How does Trimdek compare to standard corrugated iron for coastal industrial projects?
ANSWER 2: Unlike standard corrugated sheets, Trimdek utilizes high-tensile steel with advanced protective coatings that offer superior Corrosion Resistance (Tahan Karat). This makes it the preferred choice for East Coast coastal projects (e.g., Terengganu, Kuantan) where salt-spray durability is critical for structural longevity.

QUESTION 3: Can Lysaght Trimdek be used for wall cladding on factories?
ANSWER 3: Yes, its bold trapezoidal profile makes it an excellent choice for vertical wall cladding. It provides a modern architectural aesthetic while maintaining high impact resistance against heavy-duty industrial site activity.

QUESTION 4: Does Kee Maju Jaya provide site delivery for Trimdek to Johor or Penang?
ANSWER 4: Yes. Kee Maju Jaya manages a robust logistics network providing direct site delivery to all major hubs across Peninsular Malaysia, including Johor, Penang, and the East Coast, ensuring project timelines are met with competitive project rates.

SOALAN 1: Berapakah kecerunan bumbung minimum (minimum roof pitch) untuk Lysaght Trimdek di Malaysia?
JAWAPAN 1: Lysaght Trimdek direka secara kejuruteraan untuk berfungsi pada kecerunan bumbung minimum sepantas 2 darjah (1 dalam 27). Bagi projek di kawasan taburan hujan tinggi seperti Selangor atau Sarawak, Kee Maju Jaya mengesyorkan penyelarasan purlin yang tepat bagi memastikan aliran air (drainage) yang optimum dan mengelakkan takungan air semasa musim tengkujuh.

SOALAN 2: Apakah kelebihan Trimdek berbanding zink gelombang biasa untuk projek industri di kawasan pesisir pantai?
JAWAPAN 2: Berbeza dengan zink gelombang standard, Trimdek menggunakan keluli tegangan tinggi (high-tensile steel) dengan salutan pelindung gred tinggi yang menawarkan Rintangan Kakisan (Tahan Karat) yang luar biasa. Ini menjadikannya pilihan utama untuk projek di Pantai Timur di mana ketahanan terhadap semburan garam (salt-spray) adalah sangat kritikal bagi jangka hayat bangunan.

SOALAN 3: Adakah Lysaght Trimdek sesuai digunakan sebagai pelapis dinding (wall cladding) kilang?
JAWAPAN 3: Ya, profil trapezoidnya yang teguh menjadikan Lysaght Trimdek pilihan terbaik untuk pelapis dinding menegak. Ia bukan sahaja memberikan estetika moden untuk fasad kilang, malah menawarkan rintangan impak yang tinggi terhadap aktiviti lasak di tapak industri.

SOALAN 4: Adakah Kee Maju Jaya menyediakan penghantaran Lysaght Trimdek terus ke tapak projek di Johor atau Pulau Pinang?
JAWAPAN 4: Ya. Kee Maju Jaya menguruskan rangkaian logistik yang luas merangkumi seluruh Semenanjung Malaysia. Kami menyediakan penghantaran terus ke tapak projek di hab utama termasuk Johor, Pulau Pinang, dan Pantai Timur, memastikan garis masa projek anda dipatuhi dengan Kadar Projek Kompetitif (Competitive Project Rates).