Search Product
Awaiting product image

MARKLON Poly Carbonate Sheet (HOLLOW SHEET)

MARKLON Poly Carbonate Sheet (HOLLOW SHEET)

Marklon Polyglass Polycarbonate Hollow Sheet: The Ultimate Glazing Solution

Marklon Polyglass Polycarbonate Hollow Sheet is a leading choice for customers seeking superior glazing solutions, thanks to its remarkable features and benefits:
Features:
  • Energy Saving: The sheet’s exceptional weatherability and impact resistance help minimize maintenance and glazing replacement costs.
  • Durability and Safety: With an impact strength 200 times greater than glass and 10 times greater than acrylic, this sheet ensures unparalleled safety and durability.
  • Design Flexibility: Whether cold-formed to light radii or thermo-formed to unique shapes, these sheets offer endless design possibilities. They are available in a variety of tints, perfect for pool enclosures, skylights, sound barriers, and more.
  • UV Coated: The sheets come with a high-density UV reflector coating, resisting the degrading effects of sunlight and protecting against yellowing.
  • Lightweight: Stronger and lighter than most glazing materials, Marklon Polyglass® Polycarbonate Hollow Sheet requires less structural support, making installation easier.
  • Heatproof: The multi-cover structure of the sheet ensures better heatproof function compared to solid materials.
Benefits:
  • Cost-Effective: Minimized maintenance and replacement costs result in long-term savings.
  • Safety Assurance: Superior impact resistance ensures safety in various applications.
  • Aesthetic Appeal: The variety of tints and design flexibility enhance the aesthetic value of any project.
  • Environmentally Friendly: Energy-saving features contribute to a greener environment.
Applications:
  • Pool enclosures
  • Skylights
  • Covered walkways
  • Sound barriers
  • Office partitions
In conclusion, Marklon Polyglass® Polycarbonate Hollow Sheet offers unmatched quality, durability, and design flexibility, making it the ideal choice for a wide range of glazing needs.

 

PC Hollow Sheet

Superior quality resin from German & Japan

Color & Pattern

NORMAL SERIES – COLOR

 

MH31 BROWNMH32 BLUEMH33 GREE

MH35CLEAR MH36 GREENISH BLUEMH37 GREYMH38 WHITMH OG ORANGEMH RD RED

MHYW YELLOW

Thickness (MM)

4mm – 10mm

Lenght (MM)

Up to 12200mm (40′) or cut to size

Width (MM)

1220 / 2100 / 2135

  • Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity
  • Thickness tolerance : subject to thickness tolerance
  • Colour only for reference, order based on sealed sample

Product Characteristics

General

Item
Test Method
Unit
Result
Impact Resistance
Izod Impact (Notched)
* Raw material – Resin Specification
Sheet Curve Radius Limitation
Thickness = 6mm > 1050mm
Thickness = 10mm > 1750mm
ASTM D 256
Pendulum : 7.5 Joule
J / m
908
Specific Gravity
Density, D 23˚C
ASTM D 792
Sp gr 23/23˚C
Kg/m
1.2
Flammability
Horizontal Burn (Flame Spread)
ASTM D 635
Mm/minute
< 25
Test Report
P05440

 

Installation & Storage Method

Recommended Installation Method

Marklon Polyglass® Polycarbonate Hollow Sheet’s is produced with a protective PE film both sides which should be kept on until the panel is fastened. The UV protected side is to be faced towards the sun and is marked with printed film (Marklon Polyglass® PC Hollow Sheet). Remove all protective film immediately after installation.
Make sure the support structure is clean and dry. Do not directly screw the sheet, only use aluminium clapping for joining. Must leave a gap of at least 5mm in between sheets for thermal expansion and contraction.

DRILLING : Use only new or sharply ground steel or carbide tipped drills. All holes must be drilled at least 40mm from the edge of sheet.

END CLOSURE : Sheets must always be installed with ribs in vertical inclination. Close upper/lower ends with suitable tape and / or a U profile.

BENDING : Radius of bending curve should not exceed the figure indicated in the diagram.

THERMAL EXPANSION – EDGE ENGAGEMENT : Sheets will expand on exposure to heat . An expansion space of 3mm / M should be allowed for each dimension as illustrated (t). The appropriate edge engagement ( R ) is determined by the distance of an open end from the last rib (E) according to the sheet.

 

 

Important Guidelines

For maintenance and storage guidelines

Storage Method

STORAGE : Sheets should be kept indoor, protected from sunlight and rain fall by an appropriate opaque waterproof roof cover. Sheets should be laid flat on the floor ( do not get contact with cement floor/wall) and away from chemical contact.

Cleaning Method

CLEAN : Use only neutral detergent of mild soap for cleaning. Wash by using soft cloth or sponge . Rinse sheet with lukewarm water (below 60˚C)

Sealant

SILICONE : Use only neutral silicone for polycarbonate.

Cutting Method

CUTTING : Use blade for cutting Marklon Polyglass® Polycarbonate Hollow Sheet.

 

 

 

=============================================================================================================

For more information,

please feel free to contact our customer service chat during working hours.
Working hours: 8.30 am – 5.00 pm
Saturday – Thursday, excluding public holiday & Friday
Whatsapp us now for more information :

012-6964709     or

012-9557709

Additional information

For more information:

Please feel free to contact our customer service chat during working hours.

Working hours: 8.30 am – 5.00 pm
Saturday – Thursday, excluding public holiday & Friday

Whatsapp us now for more information:

Customer Reviews

Related Products

Related products

At Kee Maju Jaya Trading Sdn Bhd, we are more than just a building materials supplier—we are your trusted partner in building stronger, more resilient communities.

Facebook Instagram Youtube
Quick Links
Contact
  • Privacy Policy
  • Terms & Service
Copyright 2025 © All Right Reserved Kee Maju Jaya